The spinning reel is probably the most popular choice of reel for bait fishing among recreational anglers. Due to it being very easy to use and also being efficient most recreational anglers at some point use this type of reel.
The spinning reel got its name because of the rotating bail wires and bail arms that go around the spool.
A spinning reel is made up of 8 main parts: the foot, the handle, the body, the anti-reverse switch, the bail, the spool release, the line spool, the drag adjustment, and the line roller.
Each of them is an important part that performs a certain function. And if you want to have an in-depth background regarding the job of each part, here’s an overview.
You might be interested to read also: Best Saltwater Spinning Reel 2024
How Does Spinning Reels Work: The Basic Mechanism
A spool is a cylindrical object where the line is wounded around to allow the line to be cast and retrieved.
The spool itself does not spin around but it moves up and down along the reel to allow the line to be rewind back on itself evenly.
This allows the line to spool from bottom to top and from top to bottom so it doesn’t bunch up and down.
If the spinning reel lacked this feature the line would bunch up in the top, bottom or at the middle of the spool. Those bunches can build up to a point where it would make it very hard for the rotor arm and the bail wire to circle around the spool.
The Bail Arm
A very obvious component of the spinning reel is the bail arm. It is a wire contraption that is bent across the top of the spool.
Its function is to help manage the line. When the bail is in a closed position the line does not pull and you can retrieve it.
If you want to cast the line you hold the line near the fishing rod itself by one finger, and flip the bail arm in the other direction allowing for the line to be cast.
You then jerk the fishing rod in the direction you want the line to go and release your finger from over the line and watch the line fly towards the water.
Then when you want to retrieve the line or stop it at a certain point you either flip the bail arm to a closed position or just crank the handle to retrieve the line and the automatic bail closure will flip the bail for you.
The Reel’s Foot
Another distinct feature of the spinning wheel is a handle-like object designed like a long neck which is called reel foot.
The reason it is designed like a long neck is because it hangs underneath the fishing rod connecting both the rod and the reel together, allowing enough space for the bail to spin while casting or retrieving your line in a way that doesn’t interfere with your fingers or the fishing rod itself.
Likewise for the handle found on the side of the reel, designed to be long enough to leave adequate room between the spinning reel and your hands.
User-friendly
One of the features of the spinning reel that it’s both right and left-handed friendly.
Since you can unscrew the handle from the right side by removing the screw on the left side and attaching the handle to the left side of the reel and put the screw on the right side.
Also, the screws on the handle can be helpful when storing the reel, since the handle is too long it might hook on stuff around, essentially damaging the handle.
You just loosen the screw on the reel until you feel the hinge loosening up, then press on the handle itself to fold it or stick it near the body of the spool and re-tighten the screw again.
The Anti-Reverse Switch
Another feature on the spinning reel is a button called the anti-reverse.
While it’s on the on position you can only crank your handle in one direction, either to cast your line or retrieve it and the mode of switching directions is just by flipping the bail arm from one direction to the other.
When you switch the anti-reverse button to the off position you can crank your handle in both directions to cast or retrieve.
The anti-reverse button is more friendly to beginners since disabling it shuts of the gearing system in the reel, basically putting the reel on manual mode.
This means that when you cast your line and it’s pulled it would keep going until you start retrieving. So inexperienced users may lose line if it’s pulled and they are unaware.
The Drag System
Drag systems exist on the cap of the spool (called front drag system) or on the rear of the spinning real (called rear drag system). Drag systems add tension to the line as it’s being pulled off the reel.
Adding drag makes it harder to pull off the reel, and vice versa.
Whether the front or rear drag system is better is a matter of personal preference. Where some see the rear drag system easier to use, Others see that the front drag system is more spontaneous.